Did you know ?

Blog (Heading)

Brother TN-360, reset Toner

Brother TN-360, reset Toner


There are two procedures for resetting the TN-330 and the TN-360, depending on whether you have a print-only device (HL series) or multifunction device (MFC series).

Choose for which type of printer you want to perform the drum reset..

Brother DCP | Brother HL Brother MFC |
Read comments | Leave your comment |


Multi-function Device (DCP series):

If you have a Brother multi-function (DCP/MFC series) machine and recently replaced your TN-330 & TN-360 toner cartridge, you can manually reset the toner remaining

  1. Open the front toner compartment door.
  2. The printer screen should read “front cover is open”.
  3. Press the “clear” button on the printer’s front panel.
  4. Printer will say “Replace Drum?”
  5. Here do not press 1 but instead type in “*00” on the keypad. Star zero zero.
  6. The screen will say “Accepted”. Close the front cover and the low toner message will be reset.


Print-only Device (HL series):

If you have a Brother multi-function (HL series) machine and recently replaced your TN-330 & TN-360 toner cartridge, you can manually reset the toner remaining.

  1. Open front door.
  2. Turn off printer.
  3. While holding down the GO button, turn printer back on.
  4. When all four LEDs light up release GO button. All LEDs will turn off.
  5. Press the GO button 2 times. The 3 LEDs (toner, drum, paper) will light up solid.
  6. Press the GO button 5 times.
  7. Paper light will be blinking.
  8. At this point the toner end-of-life condition has been reset. Close front door.​


Multi-function Device (MFC series):

If you have a Brother multi-function (MFC series) machine and recently replaced your TN-330 & TN-360 toner cartridge, you can manually reset the toner remaining

  1. Open the front toner compartment door.
  2. The printer screen should read “front cover is open”.
  3. Press the “clear” button on the printer’s front panel.
  4. Printer will say “Replace Drum?”
  5. Here do not press 1 but instead type in “*00” on the keypad. Star zero zero.
  6. The screen will say “Accepted”. Close the door and it will reset the low toner message.

Read comments | Leave your comment |



 Source of information: Service support, Brother & SCC & Uninet & Summit

About the author


André Dagenais, president of the company, with more than 30 years of experience in the domain, is one of North American pioneers in the ink cartridges reconditioning.

He is one of the rare people to have taught and shared his skill directly to the source of the biggest North American and Asian manufacturers. It is also him who formed the great majority of the cartridges reconditioning technicians in Quebec.

In 2008 he sells is partnership to become "André Ink"

Specialized in the production high custom-made range, in the sale and the distribution of recycled, compatible and original ink cartridges, André Ink knows an immediate success.

The competition and the sellers on the Internet understood quickly that it was easier to sell a price than a good product, however, André Ink continues to sensitize the consumer so that he understands that it is impossible to buy a recycled or compatible reliable and good quality, less expensive than it cost to make it.

Faithful to our policy on the yield and the reliability of the proposed products, André Ink selects for you the best products coming from various manufacturers, importers and distributors who respect our quality criteria and if we are not capable of supplying you what is best, we shall make it for you.

Related Comments

Leave your comment